Home » Forums » Community Edition » Help

Using Trix as a SIP Gateway forward all calls to CUCM

nathburn1
Posts: 1
 Member Since:
2012-01-18
Submitted by nathburn1 on Wed, 01/18/2012 - 2:51pm.

Hey all,

Have a dilemma here, we want to use trixbox as a SIP gateway that will forward all calls to our CUCM servers.

We've got 800+ phones and even more DIDs, including 800s and local numbers. We constantly are adding new customers and I would prefer not to manage dial plans and translation patterns in multiple spots.

We have PRIs to our CUCM and then the newest are the Trix Boxes to CUCM for SIP.

What I would like to do is forward all calls to the CUCM server to be translated and forwarded off to a phone.

For Example:
555-555-5555 calls 800-555-555
I want to forward the call over a SIP trunk that is already setup and working but not involve an extension or inbound route for the 800-555-5555 specifically.
I want something similar to a route that says to forward calls with a wildcard like SIP/XXXXXXXXXX@10.110.101.15

Currently for a small group of numbers we are using an inbound route, that forward to a device that has a device address like SIP/extension@10.110.101.15

Can anyone point me in the correct direction here?

Thanks,

‹ CBEYOND with asterisk 1.6 1 extension returns dialstatus busy rather than dialstatus noanswer ›


SkykingOH
Posts: 9675
 Member Since:
2007-12-17
First of all installing a
Wed, 01/18/2012 - 6:49pm

First of all installing a new trixbox makes no sense, this project is abandoned. If you must use a distribution use FreePBX distro or PBX In a Flash. They are both supported with healthy communities.

Second, you really don't need FreePBX for this, it makes it more complicated. You could use Asterisk and write five lines of dial plan code to create your forward rules.

--

Scott

aka "Skyking"



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.