This morning I discovered that dialing 911 is not ringing the 911 center. Instead I get "your call cannot be completed as dialed".
Before I call the provider I thought I'd see if anyone here recognoized a problem in the call progress that may be corrected on my side.
I have only 2 outbound routes. Route 0 is 911 9|911 Route 1 is everything else. All trunks are SIP.
I don't see anything usual compared to other calls into the trunk.
Below is the CLI log:
Connected to Asterisk 1.6.0.26-FONCORE-r78 currently running on trixbox1 (pid = 30228)
Verbosity was 3 and is now 8
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
== Using SIP VRTP TOS bits 136
== Using SIP VRTP CoS mark 6
-- Executing [911@from-internal:1] Macro("SIP/200-00000887", "user-callerid,SKIPTTL,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/200-00000887", "AMPUSER=200") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/200-00000887", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/200-00000887", "1?Set(REALCALLERIDNUM=200)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/200-00000887", "AMPUSER=200") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/200-00000887", "AMPUSERCIDNAME=Ms Smith") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/200-00000887", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/200-00000887", "AMPUSERCID=200") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/200-00000887", "CALLERID(all)="Ms Smith" ") in new stack
-- Executing [s@macro-user-callerid:9] ExecIf("SIP/200-00000887", "0?Set(CHANNEL(language)=)") in new stack
-- Executing [s@macro-user-callerid:10] GotoIf("SIP/200-00000887", "1?continue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] NoOp("SIP/200-00000887", "Using CallerID "Ms Smith" ") in new stack
-- Executing [911@from-internal:2] Set("SIP/200-00000887", "_NODEST=") in new stack
-- Executing [911@from-internal:3] Macro("SIP/200-00000887", "record-enable,200,OUT,") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/200-00000887", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("SIP/200-00000887", "recordingcheck,20120110-103448,1326213288.10206") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck,20120110-103448,1326213288.10206: Outbound recording not enabled
--
-- Executing [s@macro-record-enable:5] MacroExit("SIP/200-00000887", "") in new stack
-- Executing [911@from-internal:4] Macro("SIP/200-00000887", "dialout-trunk,2,911,,") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/200-00000887", "DIAL_TRUNK=2") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/200-00000887", "0?sub-pincheck,s,1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/200-00000887", "0?disabletrunk,1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/200-00000887", "DIAL_NUMBER=911") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/200-00000887", "DIAL_TRUNK_OPTIONS=trwW") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/200-00000887", "OUTBOUND_GROUP=OUT_2") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/200-00000887", "0?nomax") in new stack
-- Executing [s@macro-dialout-trunk:8] GotoIf("SIP/200-00000887", "0?chanfull") in new stack
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/200-00000887", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/200-00000887", "DIAL_TRUNK_OPTIONS=twW") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/200-00000887", "outbound-callerid,2") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/200-00000887", "0?Set(CALLERPRES()=)") in new stack
-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/200-00000887", "0?Set(REALCALLERIDNUM=200)") in new stack
-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/200-00000887", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing [s@macro-outbound-callerid:6] Set("SIP/200-00000887", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("SIP/200-00000887", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("SIP/200-00000887", "TRUNKOUTCID=gensip comp ") in new stack
-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/200-00000887", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,12)
-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/200-00000887", "1?Set(CALLERID(all)=gensip comp )") in new stack
-- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/200-00000887", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/200-00000887", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
-- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/200-00000887", "0?AGI(fixlocalprefix)") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("SIP/200-00000887", "OUTNUM=911") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/200-00000887", "custom=SIP/sip-gensip-cons-01") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/200-00000887", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^)twW)") in new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/200-00000887", "dialout-trunk-predial-hook,") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/200-00000887", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/200-00000887", "0?bypass,1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/200-00000887", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:19] Dial("SIP/200-00000887", "SIP/sip-gensip-cons-01/911,300,twW") in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
== Using SIP VRTP TOS bits 136
== Using SIP VRTP CoS mark 6
-- Called sip-gensip-cons-01/911
-- SIP/sip-gensip-cons-01-00002333 is making progress passing it to SIP/200-00000887
trixbox1*CLI>
trixbox1*CLI>
trixbox1*CLI>
trixbox1*CLI> ---- Your call cannot be completed as dialed message heard here
trixbox1*CLI> ---- Then we hang up
trixbox1*CLI>
== Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on 'SIP/200-00000887' in macro 'dialout-trunk'
== Spawn extension (from-internal, 911, 4) exited non-zero on 'SIP/200-00000887'
-- Executing [h@from-internal:1] Macro("SIP/200-00000887", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/200-00000887", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,4)
-- Executing [s@macro-hangupcall:4] GotoIf("SIP/200-00000887", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,7)
-- Executing [s@macro-hangupcall:7] GotoIf("SIP/200-00000887", "1?theend") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] Hangup("SIP/200-00000887", "") in new stack
== Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/200-00000887' in macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/200-00000887'
trixbox1*CLI> exit
Member Since:
2012-01-10