Incoming SIP to H323

jozwiak
Posts: 3
Member Since:
2010-06-24

Hey Guys

I have made a connection like this

SIP-Provider Trixbox h323 AVAYA CM

The problem is that I can't get the incoming SIP call to the AVAYA
but I can call from the AVAYA out over the SIP Provider without any problem

I have made a user with a "follow me" on to the same number with an 0 infront
On the outbound route I have made "0|."

I don't need any extension on the trixbox. I only need every thing from the SIP provider to go to the H323 connection and vice versa

Any suggestion

From ooh323.conf
[TESTACM]
type=peer
context=from-internal
host=xx.xx.xx.xx ; AVAYA ACM
port=1720
allow=ulaw
canreinvite=no
dtmfmode=rfc2833

Outbound Roules
ACM
Dial Patterns: 0.

Trunk:
OOH323/$OUTNUM$@10.250.xx.xx:1720

from sip_additional.conf
[COMENDO]
host=voip9.telsome.com
username=36923584
secret=*************
type=peer
authname=36923584
canreinvite=no
context=from-pstn
dtmf=rfc2833
dtmfmode=rfc2833
fromuser=36923584
insecure=port,invite
nat=yes
qualify=yes
user=phone



SkykingOH
Posts: 9678
Member Since:
2007-12-17
Please read the firstpost

Please read the firstpost "how to ask for help"

You did not provide enough information for anyone to help you.

--

Scott

aka "Skyking"



DungeonMaster3000
Posts: 124
Member Since:
2010-05-21
we have a trixbox playing

we have a trixbox playing nice with an avaya ip office 403 over a h323 trunk. read this as may help or be similar.
http://trixbox.org/forums/trixbox-forums/h-323/trixbox-and-avaya-...



jozwiak
Posts: 3
Member Since:
2010-06-24
I'm sorry that I didn't read

I'm sorry that I didn't read it before. I have typed some extra info in, Hope that it is enough



jozwiak
Posts: 3
Member Since:
2010-06-24
@DungeonMaster3000 I have

@DungeonMaster3000

I have the connection to the avaya an can call from and back, the problem comes when I want the incoming call on the SIP Peer to go direct to h323 (avaya).
I have no problem calling out from the avaya to the SIP peer



DungeonMaster3000
Posts: 124
Member Since:
2010-05-21
Just making sure i

Just making sure i understand correctly - You want the call to come through your trixbox and be terminated on an extention on your avaya right? If that's the case, you could create an extention on your trixbox which automaticlly forwards to the extention on your avaya... then in your inbound route set the destination to your newly created extention. I'm not sure if that is the best way to do it but should still work.



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.