All;
I would be very grateful for any insight at all on this problem. I have setup a Trixbox CE box version 2.6.2.3 for development testing. I created a sip trunk to my production PBX to make outgoing calls. That works fine. However, when I try to make a call using a .call file, it starts to dial and connect, then fails. (The first thing I did was check file permissions). I am getting the following error:
-- Called to-pbx75/2405751212
-- SIP/to-pbx75-09832e88 is making progress passing it to Local/2405751212@from-internal-6931,2
== Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on 'Local/2405751212@from-internal-6931,2' in macro 'dialout-trunk'
== Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on 'Local/2405751212@from-internal-6931,2'
-- Executing [h@macro-dialout-trunk:1] Macro("Local/2405751212@from-internal-6931,2", "hangupcall|") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("Local/2405751212@from-internal-6931,2", "vw") in new stack
[Jul 7 13:21:43] NOTICE[3164]: pbx_spool.c:341 attempt_thread: Call failed to go through, reason (0) Call Failure (not BUSY, and not NO_ANSWER, maybe Circuit busy or down?)
Here is my call file:
Channel: Local/2405751212@from-internal
Context: autodial2
MaxRetries: 5
RetryTime: 600
WaitTime: 5
CallerID: The Acme Widget Company
Extension: s
Priority: 1
Account: 777
Archive:
Setvar: NAME=John Doe
Setvar: NUMBER=2405751212
Setvar: CAMPAIGN=
Setvar: VOICEMSG=
Member Since:
2008-01-17