Home » Forums » Community Edition » Help

Incoming DID Multiple IVR

aerodesliza
Posts: 328
 Member Since:
2008-08-10
Submitted by aerodesliza on Thu, 12/24/2009 - 6:12am.

Hi guys,

Im using Trixbox 2.8 + Openvox D110P T1 card, let me explain my scenario, Im tring to use my trixbox server for two different office but using the same T1, I'll have 2 DID 1111,2222 and what I want is to choose difference IVR prompt depending the DID I received.

I was thinking to create 2 difference Incoming route and use the route's DID Number to match the DID number received but How can I setup the T1 to receive DID? How can I achive that?

Thanks in regard
(sorry my english is bad)

‹ Upgrade zaptel to dahdi How to Connect 2 Trixboxes with IAX2 Trunks ›

&nbsp

SkykingOH
Posts: 9541
 Member Since:
2007-12-17
Is the circuit an
Thu, 12/24/2009 - 8:26am

Is the circuit an Internet/Data T1 or and ISDN PRI line?

It could also be a channelized T1.

--

Scott

aka "Skyking"


&nbsp

aerodesliza
Posts: 328
 Member Since:
2008-08-10
Hi Sky thanks for the
Thu, 12/24/2009 - 8:36am

Hi Sky thanks for the response, It's a CAS T1 (not PRI) not canalized.

Thanks in regard


&nbsp

SkykingOH
Posts: 9541
 Member Since:
2007-12-17
Well, CAS is Channel
Thu, 12/24/2009 - 8:52am

Well, CAS is Channel Associated Singling so it is channelized.

DID info is sent inband using DTMF. Most carriers use wink start. Rhino drivers specifically support CAS T1's so I would highly recommend Rhino unless you want to spend a whole lot of time integrating DAHDI including a possible rebuild from DAHDI source to change options.

--

Scott

aka "Skyking"


&nbsp

aerodesliza
Posts: 328
 Member Since:
2008-08-10
...
Sun, 12/27/2009 - 3:08pm

aaa


&nbsp

aerodesliza
Posts: 328
 Member Since:
2008-08-10
i was thinking to use a
Thu, 12/24/2009 - 8:29pm

i was thinking to use a openvox d110p t1 card, do i need to rebuild from dahdi source to change option? really i have never install rhino but i think like the other card you need to change framing, trunk type and so on, am i right?

thanks in regard


&nbsp

aerodesliza
Posts: 328
 Member Since:
2008-08-10
any help would be
Mon, 12/28/2009 - 6:51am

any help would be appreciated.

Thanks in regard


&nbsp

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.