I posted over in the h.323 forum, but figured I would post here as well. I'm connecting a Panasonic KX-TDA 200 with a h.323 gateway card with a trixbox installation. The ultimate goal is to have the trixbox handle voicemail for the panasonic pbx. The gateway card in the TDA appears to only send DTMF signals inband. Is there a way to configure voicemail to handle the dtmf codes inband?
I am not familiar with Panasonic but you can set up a trunk for the connection between the 2 systems and specify dtmfmode=inband on the trixbox side.
Matthew Martin
Chief Consultant
VCCS
http://www.vccs.ca
trixbox Hosting, Customization and Support|Business VoIP
Still learning Trixbox and Asterisk so sorry if this is a newbie question, where do I set dtmfmode=inband ? I have a custom trunk for connecting to the panasonic. I don't see where that gets set.
You put it in with your trunk settings.
Regards,
Jon
Please respond if your problem was ever solved, and how you solved it. It'll help the next guy.
In the custom dial string?
Copyright © 2011 Fonality
Fonality and trixbox are trademarks of Fonality. Trademark Policy. Privacy Policy.
Asterisk is a trademark of Digium, Inc. Fonality and trixbox are not affiliated with, nor endorsed by Digium, Inc.
Member Since:
2009-11-03