Hi everybody, i have this situation:
I have TRIXBOX 2.6 machine that i connect via OpenVox B100p ISDN card to Panasonic PBX with ISDN module. I have installed mISDN driver for the TRIXBOX machine and my card is in te_ptmp mode.
I have made a trunk in TRIXBOX with dial string "mISDN/g:intern/$OUTNUM$" , and i can make calls between SIP phones and the Panasonic PBX.
I also made a Inbound route with DID 104 that is ringing to all of my SIP phones (2000 and 2001)
I made other inbound route with DID 1041 that rings only to SIP phone 2000 and inbound route 1042 that rings to 2001. Everything is fine when i call from panasonic phone to 104 ( the main inbound DID )
But when I call from panasonic phone to 1041 or 1042 the caller hears everything and the called parity cannot hear anything.
Also i can make only 1 call at time. As i know i should can make 2 calls over 1 ISDN line.
here is some outputs:
trixbox1*CLI> misdn show channels
Chan List: (nil)
trixbox1*CLI> misdn show stacks
BEGIN STACK_LIST:
* Port 1 Type TE Prot. PMP L2Link UP L1Link:UP Blocked:0 Debug:0
Thanks in advance for your help.
Member Since:
2009-07-21