Home » Forums » Community Edition » SIP and IAX trunks and providers

Cisco call manager - Trixbox - Voipcheap

igac
Posts: 15
 Member Since:
2006-07-12
Submitted by igac on Thu, 03/22/2007 - 12:22am.

Following instructions at http://www.voip-info.org/wiki-Asterisk+Cisco+CallManager+Integrat...
I have managed to get the trunk between CCM4.1 and Trixbox running just fine.
Calls from both sides work without a problem.
The main purpose of doing this was so that trixbox would serve as a link to other SIP voip providers as well as serving a few external extensions.
I have setup a voipcheap trunk and from a softphone attached to trixbox calls go through it just fine.
The problem is that I want to use that voipcheap trunk from call manager extensions and that doesn't work.
CCM sends the requested number(international format) through the trunk to trixbox but receives 404 from it. That same number when dialed through the softphone attached to the trixbox goes through the voipcheap trunk just fine.
I have setup two outbound routes, XXXX to go out the CCM trunk (I have extensions with four numbers) and XXXXXXXXXXXXX to go out the voipcheap trunk. I have no inbound routes(maybe this is the problem).

Does anybody have an idea how to set this up ?

Thanks

Igor

‹ SIP Providers that pay affiliates. Using mediant 2000 as sip gateway ›

&nbsp

igac
Posts: 15
 Member Since:
2006-07-12
I have managed to get it working
Thu, 03/22/2007 - 7:33am

Originally CCM was coming from-trunk, I changed it be from-internal and it works ok now :-)


&nbsp

minimok
Posts: 11
 Member Since:
2006-11-17
Information about CCM integration
Sat, 10/13/2007 - 4:08am

Hi,

I try to do the same settings, but where do you change the from-trunk to from-internal ?
Can you give me more details about route settings for Call Manager like :
Cisco CallManager -> Trixbox -> Voip provider
and
Voip provider -> Trixbox -> Cisco CallManager.

Thanks very much in advance.

Best regards.

Sébastien.


&nbsp

paniagua09
Posts: 1
 Member Since:
2010-01-16
Problems COmunicating Call Manager / Trix Box
Sat, 01/16/2010 - 3:44pm

Hi

I follow the steps describes in this site http://www.voip-info.org/wiki-Asterisk+Cisco+CallManager+Integrat...
to create a sip trunk to my Call Manager I have the version CCM 4.1 (3)

I did al the steps listed and when i try to call to a extension 7xxx in the Call Manager it Says All Circuits Are busy. and the other hand when i call from the Call Manager to extension 1xxx in trix box it doesnt make nothing.

--

Daniel E. Paniagua


&nbsp

SkykingOH
Posts: 9541
 Member Since:
2007-12-17
Daniel, Please read the "how
Sat, 01/16/2010 - 11:54pm

Daniel,

Please read the "how to ask for help" in or wiki.

We need your trunk configurations and call traces to help.

--

Scott

aka "Skyking"


&nbsp

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.