Has anybody been able to get Iconnecthere to connect with Trixbox? I am able to register, but outbound calls have no sound and inbound calls go straight to Iconnecthere voicemail. Here is what my settings look like.Outgoing settingsTrunk name: ichallow=ulawcanreinvite=nocontext=guestdisallow=allhost=natrelay.deltathree.comsecret=passwordtype=peerusername=ich useraccount (not inbound phone number)Register string: useraccount:password@natrelay.deltathree.com/useraccount
Both outgoing and incoming work. I know some of the settings don't make sense, but use these and when they work, try what you will.
deltathree
allow=gsm&ulaw&alaw
authname=10 digit DID number
canreinvite=no
context=from-pstn
disallow=all
dtmfmode=rfc2833
fromdomain=natrelay.deltathree.com
host=natrelay.deltathree.com
insecure=very
nat=yes
qualify=yes
secret=yourpassword
type=friend
username=accountnumber (8 digit in my case)
Don't use any entry in User details but do put in an incoming route (or use a general incoming route)
Also, the Registration statement should look like:
10digitDID:password:accountnumber@sipauth.deltathree.com
Outbound is now working, and I am able to register, however Inbound callers get the message that the number is unavailable. Is this becuause my ICH account was previously tied to the ICH Linksys ATA?
Thank you so much for posting these settings, it took me two months of experiments and I never managed to have incoming calls working, I had to unconditionally forward the calls to a Broadvoice number.
I followed your settings and reloaded the trunk, all working great.
Many thanks again,
Stefan
Hello friends
i have defined the trunks as you sugested
allow=ulaw&alaw
canreinvite=no
context=from-pstn
disallow=all
dtmfmode=rfc2833
fromdomain=natrelay.deltathree.com
host=natrelay.deltathree.com
insecure=very
nat=yes
qualify=yes
secret=yourpassword
type=friend
username=accountnumber
it register ok and can make outbound calls....but just one by one
i cannot make two at the same time using different extensions. Any ideas?
thanks and regards
Jorge.
i am having the same issue w/ ich only making one call at a time. ich support is not help, i am still waiting to hear back from them. do they only offer one channel?
.
They offer 1 channel maximum. try didww.com they offer by default two channels
Juan
.
I was really happy with your advice because my ICH accounts rings on My trixbox really fast, but after a while ( 15 minutes) my ICH account goes to "not register" status in trixbox Panel, and I was unable to make/receive calls. So, I decided to go back to my original configuration, and now everything is working fine again, except incoming calls. My account goes back to "register status" in the Trixbox Flash Panel. I am confussing why this configuration works just for a while ?
I spend several hours trying this works, and my final configuration is:
host=natrelay.deltathree.com
insecure=very
secret=your secret
type=peer
username=your 8 digit user #
the register string must be the same as above.
I am using three SIP-3102 as FXO and FXS ports, Trixbox CE 2.2.3 and a Linksys WRT54G
Thanks a lot !
The follow config works great incomming/outgoing, more than 12 calls at the same time but only on one of my accounts, don't know why.
On the other I receive a "this number is not on service" message when registred and the comun ¨mail box full¨ when not registred.
Icallhere tell me both accounts are config the same way on their side. Maybe there is somethin on my Trixbox. Hope this info helps.
OUTGOING SETTINGS
allow=g729
disallow=all
fromdomain=deltathree.com
fromuser=1800xxxxxxx - your 1800 number
host=sipauth.deltathree.com
insecure=very
qualify=no
secret=xxxx your account password
type=peer
username=xxxxxxxx - Your account ID
INCOMING SETTINGS:
User Contest : from-pstn
allow=g729
context=from-trunk
disallow=all
fromdomain=deltathree.com
host=natrelay.deltathree.com
insecure=very
nat=yes
secret=xxxx - Your Password
type=peer
user=xxxxxxxx - Your ID
username=xxxxxxxx - Your ID
REGISTER STRING:
1800number:yourpassword:accountID@natrelay.deltathree.com
YES I KNOW I´M USING DIFERENTS HOSTs FOR OUTGOING AND INCOMING, BUT THIS IS WHAT WORKS FOR ME.
MrSam
Copyright © 2011 Fonality
Fonality and trixbox are trademarks of Fonality. Trademark Policy. Privacy Policy.
Asterisk is a trademark of Digium, Inc. Fonality and trixbox are not affiliated with, nor endorsed by Digium, Inc.
Member Since:
2006-09-19