Home » Forums » Community Edition » SIP and IAX trunks and providers

Problem routing DID to a SIP TRUNK

gurugirl
Posts: 2
 Member Since:
2007-08-04
Submitted by gurugirl on Wed, 06/30/2010 - 2:45am.

Hey Guys

I have an indial range of 61211118[01234]X being trunked sip to xxx.yyy.189.65

Now I want to break this down into 612111180x going to xxx.yyy.188.145 and 612111184x going to xxx.yyy.189.199
reminder being used for fax->email etc etc etc

I have created the outbound routes and sip trunks
I can see that all the sip trunks are up
I can see the outbound routes are there and also in trunks

But it isn’t working

The call gets answered by the first point xxx.yyy.189.69 and you get an rva of the number you called is not in service

Samantha

‹ VoicePulse, just not worth it..... Settings for Broadvoice ? ›
--

Regards

Gurugirl



SkykingOH
Posts: 9541
 Member Since:
2007-12-17
What kind of system is this?
Wed, 06/30/2010 - 7:44am

What kind of system is this? What is your configuration?

Your question is incomprehensible.

--

Scott

aka "Skyking"



gurugirl
Posts: 2
 Member Since:
2007-08-04
FReepbx / Trixbox
Fri, 07/02/2010 - 1:05am

Freebpx

What I have is a DID of 100 NUmbers - - - > Over a tunk to a trix box

now I need to break this up and send 10 numbers to 3 offices

so [trunk in 3453453XX] - - - - [FREEPBX]

Now I need to put 34523530X via a sip trunk to site A
I need to put 34534531X via sip trunk to site B
and 34534539X via a sip tunk to Site C

I have configured in freepbx the out bound route and also attached it to a sip trunk

Now when I ring 234234201 it stays on the box that terminates the 100 DID and states that the number is switched off, but doesnt transfer it to SITE A via the sip trunk

Samantha

Regards

Gurugirl

--

Regards

Gurugirl



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.