It was pretty easy to get a mediant 2000 working for incoming calls but can't find enough information on how to go about using it for outgoing trunks. There is a lot of documentation out there but it ends up being much more confusing than what I think the end result will be.
I do seem to see the call making it to the mediant;
---- Incoming SIP Message from 192.168.10.30:5060 to SIPInterface #0 ---- [Time: 19:41:46]
[Time: 19:41:46]es CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO
| | new GetNewIndTransaction created - #13 [Time: 19:41:46]
new AcSIPDialogAPI created - #13 [Time: 19:41:46]
| |(SIPTU#13)OPTIONS State:DialogIdle() [Time: 19:41:46]
SIPDialog(#13) changes state from DialogIdle to DialogInitiated [Time: 19:41:46]
| |(SIPTU#13)GENERAL_RESPONSE_REQ State:DialogInitiated(3dbda05b30d9ac1e1e91dd56630cc7c9@192.168.10.30) [Time: 19:41:46]
SIPDialog(#13) changes state from DialogInitiated to DialogConnected [Time: 19:41:46]
---- Outgoing SIP Message to 192.168.10.30:5060 from SIPInterface #0 ---- [Time: 19:41:46]
[Time: 190-15lephone-event/80006863 IN IP4 192.168.10.25ry, message/sipfragIBE,UPDATE
| |(SIPTU#13)DIALOG_DISCONNECT_REQ State:DialogConnected(3dbda05b30d9ac1e1e91dd56630cc7c9@192.168.10.30) [Time: 19:41:46]
SIPDialog(#13) changes state from DialogConnected to DialogDisconnected [Time: 19:41:46]
AcSIPStackAPI::FreeDialogAPI - #13 [Time: 19:41:46]
| | TransactionUserMngr::ReturnDialog - #13 [Time: 19:41:51]
SIPDialog(#13) changes state from DialogDisconnected to DialogIdle [Time: 19:41:51]
Does anyone have any documentation or notes on how to set this up with asterisk.
The device is a mediant 2K running 5.6 with one PRI connected into it.
Thanks very much.
Mike
Member Since:
2006-12-18