Add incoming route - zaptel channel box missing

brubra

Posts: 1
Member Since:
2007-03-13

Submitted by brubra on Thu, 03/13/2008 - 10:51am.

Dear all,

I'm trying to configure trixbox CE 2.6.0.2 with a Digium TDM-400p with 4 FXO-ports connected to PSTN-lines. System works just fine, can call in and out on all lines (three PSTN-lines), but I'd like to configure ZAP/3-1 to route all calls to our support-number. In a previous version of trixbox, this was a breeze, but here i'm missing something: on the Inbound routes - add incoming route, I can't find the zaptel channel - box... How much of an idiot am I? a bit of help would be greatly appreciated...

thanks,

Bruno.

&nbsp

rrust

Posts: 36
Member Since:
2007-11-19

im having same

Tue, 04/15/2008 - 2:27pm

im having same problem....where is the zap option?

&nbsp

machack

Posts: 3
Member Since:
2008-04-15

Same problem

Wed, 06/04/2008 - 4:51pm

Please help.

Thanks

Javier Robles
San Luis - Argentina

&nbsp

SkykingOH

Posts: 9541
Member Since:
2007-12-17

You have to use 'Zap Channel

Wed, 06/04/2008 - 5:24pm

You have to use 'Zap Channel DID's' you have to assign that channel a DID. Then you can route it using an inbound route. A bit more convoluted but much more flexible.

Scott

aka "Skyking"

&nbsp

ithank

Posts: 14
Member Since:
2008-03-05

ou have to use 'Zap Channel DID's' ....

Sat, 06/21/2008 - 1:57pm

Could you please clarify this? I just loaded up 2.6.1 and I don't understand how to setup the inbound routes.
Thanks,
Henry

&nbsp

SkykingOH

Posts: 9541
Member Since:
2007-12-17

Go to the 'ZAP Channel DID

Sat, 06/21/2008 - 7:25pm

Go to the 'ZAP Channel DID module'
Assign a pseudo DID number 555xxxx can be used as it won't conflict with the dial plan.
Use a unique DID per ZAP channel.
Go to 'inbound routes'
Use the DID set in step 2 and select the destination

That should do it for you.

Scott

aka "Skyking"

&nbsp

Add incoming route - zaptel channel box missing

Comment viewing options

Search

Main

User login

Who's online