Junghanns have released an update of BRIstuff for Asterisk 1.2.14
install-ZAPHFC has been updated to use this.
 
BRIstuff for Asterisk 1.2.14
Submitted by W1zz on Mon, 01/22/2007 - 11:12am.
Re: BRIstuff for Asterisk 1.2.14
Sun, 01/21/2007 - 7:42am
Thank you, much appreciated.
 
Re: BRIstuff for Asterisk 1.2.14
Sun, 01/21/2007 - 12:22pm
Anyone tried Florz patch whit this version?
 
Re: BRIstuff for Asterisk 1.2.14
Mon, 01/22/2007 - 7:31am
On Florz's patch:
- It takes the same time to build with the Florz's patch as without, so to try building with it should not be to onerous.
- If this does not work for you then to rebuild without the patch will 'reset' the config files as if you had never used the patch.
- Florz's tends to release updates infrequently (see here) and these are targeted on a specific a specific version of zaptel.
- The patch tends to benefit lower powered systems as it reduces the interrupt load.
 
Re: BRIstuff for Asterisk 1.2.14
Mon, 01/22/2007 - 9:32am
Tanks W1zz, i know that.. :)
I currently have a machine with Asterisk 1.2.10-BRIstuffed-0.3.0-PRE-1s with the last Florz patch.. If something goes wrong.... i´m f***** That´s why i haven´t tested the patch yet :-)
The patch version that i installed solved some problem´s (buffer overflows, underrun and some audio drops), but i also had to increase the pci bus latency..
 
Re: BRIstuff for Asterisk 1.2.14
Mon, 01/22/2007 - 11:12am
There's nothing to stop you re-building an older version.
Use the -a option to specify the version of asterisk and then add your other switches as normal.
You should also find that I re-number older version of zaphfc.ko so you don't lose a previous build (well not for 10 versions).
 
Dummy manual
Wed, 10/24/2007 - 6:59am
Hi all,
Is there somewhere a step-by-step manual for a real dummy, beginning user?
I have a fresh, new 2.2.4 Trixbox CE installation and want to ad a junghanns Quadbri ISDN card.
I've found some info on the junghanns website for jumper settings so that whent fine.
Now the card is in the trix.
From there on, is there a driver installation manual and so forth to get it to work?
Thanks for replying.
 
Member Since:
2006-05-31