Hi All
I have a trixbox setup at my home and I was tring to connect them together
I have done everything I am almost there the problem is
from home if I hit a extension of the office it works but if a extension of my home server is it just rings and rings
any thoughts
Thanx
Milkman
Can you see the call hitting your home servier in the CLI?
I get this working first by using the third option in the trixbox without tears guide, then tightening security as needed from there...
Hope it helps!
I used 2nd option from the book
in cli I see it
its there
i think my home trixbox does not know what to do with the call
example
home ext is 801
from office I hit 801 comes in and rings and rings
then from home computer I log off the softphone on 801 and goes to VM
I know im getting close
If you post your configs and extension ranges perhaps we could help you.
Scott
aka "Skyking"
I was hopping you pick on this post Scott you look like your the man with the answers :-)
Here is the info
home office
trunk
http://farm4.static.flickr.com/3226/3069099106_9736436728_b.jpg
Outbound routes
http://farm4.static.flickr.com/3242/3068251679_a7d6e1c7ff_o.png
main office
trunk
http://farm4.static.flickr.com/3272/3068280499_aa0253fd38_b.jpg
Outbound routes
http://farm4.static.flickr.com/3008/3069104924_08b4a121aa_o.png
Home office
http://farm4.static.flickr.com/3230/3068284317_11ef197206_o.png
main office is the same
From Main office I think I am having the problem from outbound route pushing it to 6000 is there a better way to do this ?
Thanx
Milkman
I am not sure what you have going on there. I suggest you google the numerous examples of inter machine trunking including the one I listed the other day that uses registration.
The type should be friend, you don't have any authentication setup between the two boxes and your routes look like you are sending your traffic to your home machine.
Scott
aka "Skyking"
hi
I am able to make calls out of my home office dont know if that helps
Which guide should I follow ?
There are so many
Thanx
milkman
Member Since:
2007-01-02