in trixbox ce, how to set regular pstn number, like home direct line or cell phone as extension?
so, when contacts call voip number, it could ring pstn number, the home number or cell number?
thanks guys!
how to set PSTN number as extension?
Submitted by indicateca on Thu, 07/29/2010 - 3:47pm.
here is the setting
Thu, 07/29/2010 - 7:06pm
in extension section, i select ***other(custom)device***
in the next page, i set 101 as extension and input my number 19141234567 as my number in ***This device uses custom technology.
dial*** section. the actual number is vary. then i set up trunk, the trunk works fine when i use x-lite to make and receive calls.
then the inbound route, ask the incoming call's destination as extension 101.
but, it just not go through.
any thing wrong?
thanks!
1. Create a new "Other
Thu, 07/29/2010 - 10:06pm
1. Create a new "Other (Custom) Device"
2. Fill out the basic's... ie...
2.a. Display Name: PERSONS NAME or PHONE LOCATION
2.b. SIP Alias - This is the extension number that this custom device will have.
You can leave everything else blank.
3. Under "Device Options" in "Dial" Enter the following code.
SIP/**TRUNK**/**PHONE-NUMBER-YOU-WANT-HERE
e.g SIP/MyNetFone/5555588888
Hope this helps.
Member Since:
2010-07-29