Home » Forums » Community Edition » Trunks

outbound trunk doesn't work - all circuits busy

uwaqar
Posts: 34
 Member Since:
2008-09-25
Submitted by uwaqar on Fri, 09/26/2008 - 10:00am.

Hi,

I have installed TrixBox CE in our private network and we have VoIP trunks coming in to the Session Border Controller (SBC). We don't need to register with our provider (thus no need of the register string) as these are dedicated circuits (IPVPN).

I just created a SIP trunk on TrixBox and pointed it to the IP to send outbound calls to, so in the "Outgoing Settings":

allow=alaw&ulaw&gsm
disallow=all
host=10.5.10.7
#username=***userid***
#secret=***password***
type=peer

The "Register String" I kept blank and since I just want to test outbound call for now, all settings in "Incoming Settings" are blank as well.

Then from a SIP phone rgistered to the TrixBox, I tried the outbound call but in vein - says "all circuits are busy......". Did a capture on the interface and didn't seen any outgoing INVITE to 10.5.10.7

Following is the dump from asterisk:

atlcgitrix01*CLI>
atlcgitrix01*CLI>
-- Executing [4036906974@from-internal:1] Macro("SIP/5719-b7805640", "user-callerid|SKIPTTL|") in new stack
-- Executing [s@macro-user-callerid:1] NoOp("SIP/5719-b7805640", "user-callerid: device 5719") in new stack
-- Executing [s@macro-user-callerid:2] Set("SIP/5719-b7805640", "AMPUSER=5719") in new stack
-- Executing [s@macro-user-callerid:3] GotoIf("SIP/5719-b7805640", "0?report") in new stack
-- Executing [s@macro-user-callerid:4] ExecIf("SIP/5719-b7805640", "1|Set|REALCALLERIDNUM=5719") in new stack
-- Executing [s@macro-user-callerid:5] NoOp("SIP/5719-b7805640", "REALCALLERIDNUM is 5719") in new stack
-- Executing [s@macro-user-callerid:6] Set("SIP/5719-b7805640", "AMPUSER=5719") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/5719-b7805640", "AMPUSERCIDNAME=Umer WaQar") in new stack
-- Executing [s@macro-user-callerid:8] GotoIf("SIP/5719-b7805640", "0?report") in new stack
-- Executing [s@macro-user-callerid:9] Set("SIP/5719-b7805640", "AMPUSERCID=5719") in new stack
-- Executing [s@macro-user-callerid:10] Set("SIP/5719-b7805640", "CALLERID(all)="Umer WaQar" ") in new stack
-- Executing [s@macro-user-callerid:11] Set("SIP/5719-b7805640", "REALCALLERIDNUM=5719") in new stack
-- Executing [s@macro-user-callerid:12] ExecIf("SIP/5719-b7805640", "0|Set|CHANNEL(language)=") in new stack
-- Executing [s@macro-user-callerid:13] NoOp("SIP/5719-b7805640", "TTL: ARG1: SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:14] GotoIf("SIP/5719-b7805640", "1?continue") in new stack
-- Goto (macro-user-callerid,s,23)
-- Executing [s@macro-user-callerid:23] NoOp("SIP/5719-b7805640", "Using CallerID "Umer WaQar" ") in new stack
-- Executing [4036906974@from-internal:2] Set("SIP/5719-b7805640", "_NODEST=") in new stack
-- Executing [4036906974@from-internal:3] Macro("SIP/5719-b7805640", "record-enable|5719|OUT|") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/5719-b7805640", "0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("SIP/5719-b7805640", "recordingcheck|20080926-103744|1222447064.30") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20080926-103744|1222447064.30: Outbound recording not enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:5] NoOp("SIP/5719-b7805640", "No recording needed") in new stack
-- Executing [4036906974@from-internal:4] Macro("SIP/5719-b7805640", "dialout-trunk|2|4036906974||") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/5719-b7805640", "DIAL_TRUNK=2") in new stack
-- Executing [s@macro-dialout-trunk:2] ExecIf("SIP/5719-b7805640", "0|Authenticate|") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/5719-b7805640", "0?disabletrunk|1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/5719-b7805640", "DIAL_NUMBER=4036906974") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/5719-b7805640", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/5719-b7805640", "GROUP()=OUT_2") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/5719-b7805640", "1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,9)
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/5719-b7805640", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/5719-b7805640", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/5719-b7805640", "outbound-callerid|2") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/5719-b7805640", "0|SetCallerPres|") in new stack
-- Executing [s@macro-outbound-callerid:2] GotoIf("SIP/5719-b7805640", "1?start") in new stack
-- Goto (macro-outbound-callerid,s,4)
-- Executing [s@macro-outbound-callerid:4] NoOp("SIP/5719-b7805640", "REALCALLERIDNUM is 5719") in new stack
-- Executing [s@macro-outbound-callerid:5] GotoIf("SIP/5719-b7805640", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,10)
-- Executing [s@macro-outbound-callerid:10] Set("SIP/5719-b7805640", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:11] Set("SIP/5719-b7805640", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:12] Set("SIP/5719-b7805640", "TRUNKOUTCID="ATLDC"") in new stack
-- Executing [s@macro-outbound-callerid:13] GotoIf("SIP/5719-b7805640", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,17)
-- Executing [s@macro-outbound-callerid:17] GotoIf("SIP/5719-b7805640", "0?usercid") in new stack
-- Executing [s@macro-outbound-callerid:18] Set("SIP/5719-b7805640", "CALLERID(all)=ATLDC") in new stack
-- Executing [s@macro-outbound-callerid:19] GotoIf("SIP/5719-b7805640", "1?report") in new stack
-- Goto (macro-outbound-callerid,s,23)
-- Executing [s@macro-outbound-callerid:23] NoOp("SIP/5719-b7805640", "CallerID set to "ATLDC" ") in new stack
-- Executing [s@macro-dialout-trunk:12] AGI("SIP/5719-b7805640", "fixlocalprefix") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
> fixlocalprefix: Using pattern 9003+NXXXXXXXXX
== fixlocalprefix: Dialpattern 9003+NXXXXXXXXX matched. 4036906974 -> 90034036906974
-- AGI Script fixlocalprefix completed, returning 0
-- Executing [s@macro-dialout-trunk:13] Set("SIP/5719-b7805640", "OUTNUM=90034036906974") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/5719-b7805640", "custom=SIP/GX-SIP") in new stack
-- Executing [s@macro-dialout-trunk:15] GotoIf("SIP/5719-b7805640", "1?gocall") in new stack
-- Goto (macro-dialout-trunk,s,17)
-- Executing [s@macro-dialout-trunk:17] Macro("SIP/5719-b7805640", "dialout-trunk-predial-hook|") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/5719-b7805640", "0?bypass|1") in new stack
-- Executing [s@macro-dialout-trunk:19] GotoIf("SIP/5719-b7805640", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:20] Dial("SIP/5719-b7805640", "SIP/GX-SIP/90034036906974|300|") in new stack
-- Couldn't call GX-SIP/90034036906974
== Everyone is busy/congested at this time (0:0/0/0)
-- Executing [s@macro-dialout-trunk:21] Goto("SIP/5719-b7805640", "s-CHANUNAVAIL|1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/5719-b7805640", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/5719-b7805640", "TRUNK Dial failed due to CHANUNAVAIL - failing through to other trunks") in new stack
-- Executing [4036906974@from-internal:5] Macro("SIP/5719-b7805640", "outisbusy|") in new stack
-- Executing [s@macro-outisbusy:1] Playback("SIP/5719-b7805640", "all-circuits-busy-now|noanswer") in new stack
-- Playing 'all-circuits-busy-now' (language 'en')
-- Executing [s@macro-outisbusy:2] Playback("SIP/5719-b7805640", "pls-try-call-later|noanswer") in new stack
-- Playing 'pls-try-call-later' (language 'en')
-- Executing [s@macro-outisbusy:3] Macro("SIP/5719-b7805640", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("SIP/5719-b7805640", "w") in new stack
-- Executing [s@macro-hangupcall:2] NoCDR("SIP/5719-b7805640", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/5719-b7805640", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("SIP/5719-b7805640", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("SIP/5719-b7805640", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("SIP/5719-b7805640", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/5719-b7805640' in macro 'hangupcall'
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/5719-b7805640' in macro 'outisbusy'
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/5719-b7805640'
-- Unregistered SIP '5719'

‹ unable to delete a trunk step by step configuration of openvox B200P PCI Card ›

&nbsp

uwaqar
Posts: 34
 Member Since:
2008-09-25
outbound trunk - just send INVITE to an IP address
Fri, 09/26/2008 - 10:42am

simply put, my question would be: How could I just configure a trunk for outbound calls sent to an IP address 10.5.10.7 using ulaw codec - no registration, no passwords ?


&nbsp

SkykingOH
Posts: 9538
 Member Since:
2007-12-17
Your CODEC order is wrong,
Fri, 09/26/2008 - 12:08pm

Your CODEC order is wrong, you are entering the allowd CODECS then disallowing all.

You may or may not need insecure-very

Try this:

[code]
disallow=all
allow=alaw&ulaw&gsm
host=10.5.10.7
#username=***userid***
#secret=***password***
type=peer
insecure=very
[code]

--

Scott

aka "Skyking"


&nbsp

uwaqar
Posts: 34
 Member Since:
2008-09-25
thanks
Fri, 09/26/2008 - 4:04pm

Good to have you on this forum!!!

It is working now

THANKS!!!

--
Umer


&nbsp

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.