I used NET VX1200 to act as outbound and inbound proxy for my Trixbox to PSTN. One T1 line has connected to VX1200. I have set up a sip trunk for Trixbox to connect VX1200. Outbound call is OK. I do not know the correct way to set the inbound setting in the sip trunk. I
config as follow :
USER
canreinvite=no
context=from-pstn
host=192.168.1.125
insecure=very
nat=no
port=5060
type=user
username=PSTN
I set up a catch all inbound call. It is OK to ring the specified ext. But, if I dial DID number to particular extension. It says the ext is not in service. Any one can help me.
Member Since:
2010-04-13