hi all first
sorry my inglish is not my native lenguage
ok firt
i install tribox on a atom 1.8 core duo the new ones
1 gig of ram
i install trixbox CE current release is 2.8.0
whit a tdm410 whit 2 fx and 2 fxo
i chek whit comands and is well install the drivers
i use linksys spa921
i am new to asterisk
any extencion i dial is ok they work
i make extencion calls whit no problems
from the analog to my linksys whit no problem
ok this is my story of the problems
1. i config for incoming calls rute and all group call and direct extencion and i get the same msg
"the number you just dial is out of service" i get respond from the server i know :P my phone company is in spanish :P
if i call to any of the 2 line from out side,
2. when i tray to make out side calls i get "all circut are busy know" in any of the 2 lines
live log
**********************************
Asterisk 1.6.0.9-samy-r27, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
== Parsing '/etc/asterisk/asterisk.conf': == Found
== Parsing '/etc/asterisk/extconfig.conf': == Found
Connected to Asterisk 1.6.0.9-samy-r27 currently running on trixbox1 (pid = 4199)
Verbosity is at least 10
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
== Using SIP VRTP TOS bits 136
== Using SIP VRTP CoS mark 6
-- Executing [1@from-internal:1] Macro("SIP/1010-b6e006e0", "user-callerid,SKIPTTL,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/1010-b6e006e0", "AMPUSER=1010") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/1010-b6e006e0", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/1010-b6e006e0", "1?Set(REALCALLERIDNUM=1010)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/1010-b6e006e0", "AMPUSER=1010") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/1010-b6e006e0", "AMPUSERCIDNAME=djmax") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/1010-b6e006e0", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/1010-b6e006e0", "AMPUSERCID=1010") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/1010-b6e006e0", "CALLERID(all)="djmax" ") in new stack
-- Executing [s@macro-user-callerid:9] Set("SIP/1010-b6e006e0", "REALCALLERIDNUM=1010") in new stack
-- Executing [s@macro-user-callerid:10] ExecIf("SIP/1010-b6e006e0", "0?Set(CHANNEL(language)=)") in new stack
-- Executing [s@macro-user-callerid:11] GotoIf("SIP/1010-b6e006e0", "1?continue") in new stack
-- Goto (macro-user-callerid,s,20)
-- Executing [s@macro-user-callerid:20] NoOp("SIP/1010-b6e006e0", "Using CallerID "djmax" ") in new stack
-- Executing [1@from-internal:2] Set("SIP/1010-b6e006e0", "_NODEST=") in new stack
-- Executing [1@from-internal:3] Macro("SIP/1010-b6e006e0", "record-enable,1010,OUT,") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/1010-b6e006e0", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("SIP/1010-b6e006e0", "recordingcheck,20100215-160705,1266275225.9") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck,20100215-160705,1266275225.9: Outbound recording not enabled
--
-- Executing [s@macro-record-enable:5] MacroExit("SIP/1010-b6e006e0", "") in new stack
-- Executing [1@from-internal:4] Macro("SIP/1010-b6e006e0", "dialout-trunk,2,1,,") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/1010-b6e006e0", "DIAL_TRUNK=2") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/1010-b6e006e0", "0?sub-pincheck,s,1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/1010-b6e006e0", "0?disabletrunk,1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/1010-b6e006e0", "DIAL_NUMBER=1") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/1010-b6e006e0", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/1010-b6e006e0", "OUTBOUND_GROUP=OUT_2") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/1010-b6e006e0", "0?nomax") in new stack
-- Executing [s@macro-dialout-trunk:8] GotoIf("SIP/1010-b6e006e0", "0?chanfull") in new stack
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/1010-b6e006e0", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/1010-b6e006e0", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/1010-b6e006e0", "outbound-callerid,2") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/1010-b6e006e0", "0?Set(CALLERPRES()=)") in new stack
-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/1010-b6e006e0", "0?Set(REALCALLERIDNUM=1010)") in new stack
-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/1010-b6e006e0", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing [s@macro-outbound-callerid:6] Set("SIP/1010-b6e006e0", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("SIP/1010-b6e006e0", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("SIP/1010-b6e006e0", "TRUNKOUTCID=2179181") in new stack
-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/1010-b6e006e0", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,12)
-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/1010-b6e006e0", "1?Set(CALLERID(all)=2179181)") in new stack
-- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/1010-b6e006e0", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/1010-b6e006e0", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
-- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/1010-b6e006e0", "1?AGI(fixlocalprefix)") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
> fixlocalprefix: Using pattern 2|2
--
-- Executing [s@macro-dialout-trunk:13] Set("SIP/1010-b6e006e0", "OUTNUM=1") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/1010-b6e006e0", "custom=DAHDI/1") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/1010-b6e006e0", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))") in new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/1010-b6e006e0", "dialout-trunk-predial-hook,") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/1010-b6e006e0", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/1010-b6e006e0", "0?bypass,1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/1010-b6e006e0", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:19] Dial("SIP/1010-b6e006e0", "DAHDI/1/1,300,") in new stack
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s@macro-dialout-trunk:20] Goto("SIP/1010-b6e006e0", "s-CHANUNAVAIL,1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/1010-b6e006e0", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/1010-b6e006e0", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 0) - failing through to other trunks") in new stack
-- Executing [1@from-internal:5] Macro("SIP/1010-b6e006e0", "outisbusy,") in new stack
-- Executing [s@macro-outisbusy:1] Playback("SIP/1010-b6e006e0", "all-circuits-busy-now,noanswer") in new stack
--
-- Executing [s@macro-outisbusy:2] Playback("SIP/1010-b6e006e0", "pls-try-call-later,noanswer") in new stack
--
== Spawn extension (macro-outisbusy, s, 2) exited non-zero on 'SIP/1010-b6e006e0' in macro 'outisbusy'
== Spawn extension (from-internal, 1, 5) exited non-zero on 'SIP/1010-b6e006e0'
-- Executing [h@from-internal:1] Macro("SIP/1010-b6e006e0", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("SIP/1010-b6e006e0", "vw") in new stack
-- Executing [s@macro-hangupcall:2] NoCDR("SIP/1010-b6e006e0", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/1010-b6e006e0", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("SIP/1010-b6e006e0", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("SIP/1010-b6e006e0", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("SIP/1010-b6e006e0", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/1010-b6e006e0' in macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/1010-b6e006e0'
***********************************
i hope you can help me whit a step by step
what i am doing wrong
if you whant any config file i will post them whit no problem
tnx for the help
Member Since:
2009-12-24