Home » Forums » Community Edition » Trunks

Unable to get a TE110P running

cathavale
Posts: 7
 Member Since:
2006-06-21
Submitted by cathavale on Tue, 07/04/2006 - 7:31pm.

Hi,
If have installed the software on a new box with a TDM400P and 1FXO Port and a TE110P. The TDM400P comes online and has the trunk automatically setup. however the TE110P does show up but does not come online. Can anyone please point me in the right direction?

‹ can't get line with 3com How do I get ISDN HFC card to work ›

&nbsp

samhsma
Posts: 23
 Member Since:
2006-06-19
Re: Unable to get a TE110P running
Mon, 06/26/2006 - 8:31pm

Hi,

Me too, i also cannot get it work for my TE100P interface card.
The system can detect my hardware, and i also download a tool "detectVoiceHW" for detect the hardware. The status is loaded up. But the physical interface card status light is still off.
I can't to make it work. Please help :(

Sam


&nbsp

cathavale
Posts: 7
 Member Since:
2006-06-21
Re: Unable to get a TE110P running
Mon, 07/03/2006 - 7:03am

Hi Sam,
Hopefully you got yours working. If not this is what I had to do

Add lines into Zaptel.conf

and

Add lines into Zapata.conf

Let me know if you require the info.

Thanks,
Chris A


&nbsp

tomcruize
Posts: 1
 Member Since:
2006-07-04
Re: Unable to get a TE110P running
Tue, 07/04/2006 - 7:31pm

Configuration for T110P using a channel bank.

In /etc/zaptel.conf:
span=1,0,0,esf,b8zs
fxoks=1-24
In /etc/asterisk/zapata.conf:
signalling=fxo_ks
context=blah
group=1
channel => 1-24


&nbsp

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.