Home » Forums » Community Edition » Trunks

What is the best T1 card to use with trixbox

jpcw
Posts: 15
 Member Since:
2007-12-30
Submitted by jpcw on Mon, 02/15/2010 - 4:49pm.

We currently have a trixbox set up with 4 onramp2 lines and want to upgrade to ISDN10 or 20. from the below which would be the best card to use and cause the least problems during setup and running. Cost is not a major issue.

Digium Wildcard TE120P
Sangoma A101u Single T1/E1 Interface PCI Card
Sangoma A101d Single T1/E1 Interface PCI Card
Digium Wildcard TE205P
Digium Wildcard TE210P
Digium Wildcard TE207P

Probably do not need 2 ports but if the quality of the cards is better then don't mind having the extra port.

‹ TDM410P noise on FXS ports tdm410 problems ›


kerryg
Posts: 6790
 Member Since:
2006-05-31
Looks like you are looking
Tue, 02/16/2010 - 9:31am

Looks like you are looking at old model numbers. The current Digium card is the TE122P which is a single port card that supports hardware echo cancellation. I highly recommend a card with hardware echo can, it will save you tons of time in troubleshooting and tweaking.

--

Kerry Garrison
http://www.VoipStore.com - http://3cxbook.com
(888) VOIPSTORE - (888) 864-7786



jpcw
Posts: 15
 Member Since:
2007-12-30
The issue is that I'm in
Thu, 02/18/2010 - 12:45am

The issue is that I'm in Australia and can only use cards that are approved locally which normally means using the older models. Can't find someone who has the TE122P marked as approved over here.

EDIT - That being said I did a search and there are a number of Australian resellers selling that card but they do not state if it is approved or not. Our normal supplier who has the cards I listed above gives their approval status on the cards.

EDIT 2 - Ok I found a supplier who does state that the card is A-Tick approved so will go with that card. Thanks for the advice.



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.