Home » Forums » Vendor Forums - Certified » Aastra endpoints

New firmware RPM aastra-ipphone 2.6.0

aastra1
Posts: 287
 Member Since:
2006-11-06
Submitted by aastra1 on Thu, 07/01/2010 - 12:53pm.

We just made available to the trixbox yum repository a new phone firmware RPM package which includes the latest GA firmware loads for the Aastra SIP phones:

  1. firmare 1.4.3 build 23 for Aastra 9112i, 9133i, 480i, 480iCT
  2. firmware 2.6.0 build 66 for Aastra 6730i, 6731i, 6751i, 6753i, 6755i, 6757i, 6757iCT, 9143i, 9480i, 9480iCT
  3. firmware 3.0.1 build 2015 for the Aastra6739i

The various release notes are available on our web site http://www.aastratelecom.com.

Installation
On the console as root
yum update aastra-ipphone

This new RPM package is recommended with the new version of the XML scripts (2.3.0).

Regards

‹ Aastra Contacts XML Application dialing from a callers list on the 9143i ›
--

---
aastra1
Aastra XML scripts 2.3.0 now available



Gregg
Posts: 5
 Member Since:
2010-07-25
New To trixbox with a Aastra endpoint question
Sun, 07/25/2010 - 7:13pm

I have 4 hours experience so far with trixbox and have a simple question about endpoints. I have 25 Aastra 67XX series phones that I need to attach to trixbox. Phones in the 67 series did not come up on the endpoint phone selection dropdown. All the other Aastra models were there. So I went to the packages screen and checked the two Aastra boxes, one for firmware 2.6.0-2 and the other for scripts 2.3.0-1 and then selected install. Now they are at the top and listed as installed. But, the 67xx series phones still don’t appear in the endpoint configuration dropdown. I even tried rebooting the trixbox server, still no Aastra 67 series.

I know nothing about trixbox so if I am overlooking something rudimentary, please kindly point me in the proper direction.

I am using trixbox 2.8.0.4

Thank You,

Gregg



SkykingOH
Posts: 9541
 Member Since:
2007-12-17
You need to install the
Sun, 07/25/2010 - 9:30pm

You need to install the Aastra-XML scripts, they auto provision the phones. The end point manager is not needed.

In the future please start a new thread with your question. Posting on an existing thread is considered hijacking.

--

Scott

aka "Skyking"



petranator
Posts: 5
 Member Since:
2010-07-29
Help!
Thu, 07/29/2010 - 12:07pm

Hi there,

I'm also fairly new to trixbox, but I believe my question is directly relevant to this firmware release.

I've got the scripts setup and the phones pulled new firmware and auto-provisioned correctly. Everything works GREAT! One problem.

With Visual Voicemail, I'm able to play, delete, etc without issue. When I leave voicemail however, the phone still shows the messages as "there". The LED also stays on indicating waiting messages. When I go back into VV, no messages are there. (So deleting IS working). Exit to main screen, still shows the messages I deleted earlier waiting.

All my phones are 6757i's and they all do the same thing.

I'm sure it's just a buggy scripting thing. Can someone point me in the right direction. (Is there a way to specify how often the phones poll for message notifications or some such thing?) Does anyone else have this issue?

Thanks.



aastra1
Posts: 287
 Member Since:
2006-11-06
Re: petranator voicemail configuration
Thu, 07/29/2010 - 1:25pm

Hello,

As detailed in the documentation, you must make sure that the Asterisk voicemail has polling configured, the "check_install" should have warned you (maybe you did not run it?). To do this you have to edit the voicemail configuration file "/etc/asterisk/voicemail.conf" or one of its included file and uncomment:

pollmailboxes=yes
pollfreq=30

and then restart asterisk via the CLI.
This will allow the Asterisk voicemail to check every 30s if the voicemail repo has been changed outside of the the regular voicemail. That should do the trick.

Also in order to keep an efficient forum, you should have used the thread for the XML scripts or create a new one with your question. We are glad to here that you like the scripts.

Regards

--

---
aastra1
Aastra XML scripts 2.3.0 now available



petranator
Posts: 5
 Member Since:
2010-07-29
Thanks.
Fri, 07/30/2010 - 7:22am

Works perfectly. Thank you so much. You guys at Aastra are awesome.



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.