Home » Forums » Vendor Forums - Certified » Aastra endpoints

Preventing "paging" screen to appear

braymond
Posts: 2
 Member Since:
2011-04-06
Submitted by braymond on Wed, 04/06/2011 - 8:02am.

One of the most annoying aspect of Aastra phones (I use 9480i and 9143i) is the fact that when a page is made (using multicast or SIP with auto-answer), the phone' screen changes.

If you start dialing while onhook, you loose the dialed digits once the paging screen goes away. If you go offhook, you won't loose what you are dialing but cannot see anything until the "paging screen" goes away.

I even upgraded the phone to 3.2.0.1011 and setup "incoming call cancels dialing" to 0 but still get this annoying screen.

Was hoping someone had an idea on how to block the screen from changing. Maybe using XML API somehow but haven't yet had much luck. Any ideas out there?

Thanks.

‹ 6739i Picture caller ID Device and User mode, BLF issue ›


obeliks
Posts: 878
 Member Since:
2010-03-14
Check this
Thu, 04/07/2011 - 1:24am

Check this thread:

http://www.fonality.com/trixbox/forums/trixbox-forums/help/interc...



braymond
Posts: 2
 Member Since:
2011-04-06
Allow BargeIn
Thu, 04/07/2011 - 4:49am

Well, the "allow barge in" feature only affects an actual call and it is already disabled on my setup.

The phone's display will still change regardless. What I was thinking was to trigger an XML API for the "Incoming Call" Event so it prevents (if that can be possible) the display from changing.

Thanks anyway,

Benoit.



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.