Home » Forums » Vendor Forums - Certified » Sangoma

RJ45 to DB15 - Siemens Hipath E1

meneses
Posts: 48
 Member Since:
2008-05-19
Submitted by meneses on Tue, 11/16/2010 - 8:04am.

Hi,

I use to have an A101D card connecet to an E1 interface on a Siemens Hicom 300, but the cable is now missing it and there's no spare, not even in local telco stores.

Does anybody know the DB15 to RJ45 cable pinout so I can make one myself?

thank you!

‹ A400+remora x2 Too much noise on line ›


SkykingOH
Posts: 9682
 Member Since:
2007-12-17
Google is our friend, link
Tue, 11/16/2010 - 1:12pm

Google is our friend, link to T1 pinouts

--

Scott

aka "Skyking"



meneses
Posts: 48
 Member Since:
2008-05-19
Thank you, Scott. But
Tue, 11/16/2010 - 1:30pm

Thank you, Scott.

But there's no info about impedance setting, which is made by short-circuiting some DB15 pins (don't know which though), only the data and ground pins.



SkykingOH
Posts: 9682
 Member Since:
2007-12-17
You asked about t1 pinouts.
Tue, 11/16/2010 - 3:42pm

You asked about t1 pinouts. I don't know anything about impedance settings. I can't imagine you would over drive your t1 interface if it is set to 0 LBO

--

Scott

aka "Skyking"



meneses
Posts: 48
 Member Since:
2008-05-19
Yes, it makes sense. thank
Wed, 11/17/2010 - 3:53am

Yes, it makes sense.

thank you, Scott.



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.