Home » Forums » Vendor Forums - Certified » Sangoma

Trixbox 2.8.01+sangoma A200

wil32
Posts: 5
 Member Since:
2009-08-19
Submitted by wil32 on Wed, 08/19/2009 - 5:21am.

- I installled Trixbox 2.8.0.1 then reboot

- Went into the freepbx web GUI, installed the kernel-devel packages

- On the server: asterisk -r, stop now, amportal stop now, shutdown -r now

- Then PBX Settings, Module admin, check for updates, download all, upgrade all, process

- confirm, return, apply

- On the server: asterisk -r, stop now, amportal stop now, shutdown -r now

- pbx settings, add extension + ftp into the server to put the configs for the Polycom 501.... Polycom success.

- - On the server: asterisk -r, stop now, amportal stop now, shutdown -r now

- Download latest RPMS for wanpipe(modules+util) launched the setup....

- Trunk/wanpipe/dahdi wont appear/work

Do you guys have any clue???

‹ Sangoma A201 configuration in unframed mode Connecting legacy ISDN videoconferencing system ›

&nbsp

Reinhard
Posts: 74
 Member Since:
2009-07-09
Not sure about the Sangoma
Wed, 08/19/2009 - 5:53am

Not sure about the Sangoma A200.
I bought a Sangoma B700 and have been waiting for a (BRI-compatible) RPM for 2 months now.
Kind of frustrating...
My system is ready to go (Trixbox 2.8.0), everything is set...except for the BRI.

I will wait another 2 weeks and then I will trash the Sangoma B700 ;-)

Ciao
Reinhard

--


&nbsp

wil32
Posts: 5
 Member Since:
2009-08-19
haha this is funny, No
Wed, 08/19/2009 - 7:22am

haha this is funny, No trunks in the pannel, i connected it to the telephone line. i can make inbound, outbound call


&nbsp

kspare
Posts: 673
 Member Since:
2007-02-16
Why would you trash the
Wed, 08/19/2009 - 7:38am

Why would you trash the card? there are other distros out there with more to offer that support what you are looking for.


&nbsp

Reinhard
Posts: 74
 Member Since:
2009-07-09
Well, I am happy with
Wed, 08/19/2009 - 11:06am

Well, I am happy with Trixbox 2.8.0
I can manage different time groups (holidays, special office hours for about 60 days/year) using the WebGUI.
I like IVRs, Anouncements, Ring Groups, ...

Of course, there are some problems.
CDR doesn`t work at all. Actually, I don`t understand why nobody is posting a workaround. This can`t be such a big problem. Did I miss the posting?
FOP is crashing. My solution to the problem...finally...was that I deleted FOP. Don`t need it anyway.
I like sophisticated endpoints, so I decided to use Cisco 7975 phones with the BLF feature. This is the main reason, why I use Asterisk 1.6!
It was a pain in the ass to configure it, but now everything seems to work.
Actually, I spent so much time to configure Trixbox and Ciscos...that I don`t want to try a new distro.

I just need something to connect Trixbox to European ISDN...
It seems Sangoma is having major problems with DAHDI. Hope they find a solution soon.
Actually I think they already uploaded a new driver. Just want to wait for the RPM...to be sure not to mess my system up ;-)

--


&nbsp

kspare
Posts: 673
 Member Since:
2007-02-16
I've been running elastix
Wed, 08/19/2009 - 9:49pm

I've been running elastix with sangoma cards for a while now. it works flawlessly. They have zero problems with sangoma and dahdi support, and you can do everything on elastix, or pbx in a flash etc that you can do on trixbox.


&nbsp

kspare
Posts: 673
 Member Since:
2007-02-16
And just as important,
Wed, 08/19/2009 - 9:50pm

And just as important, elastix provides you with, count them, TWO methods to backup your pbx!b


&nbsp

marc.sangoma
Posts: 373
 Member Since:
2008-04-08
Hi, If you are having any
Fri, 08/21/2009 - 9:57am

Hi,

If you are having any issues please call me directly at 1-905-474-1990 x123 with SSH enabled and I will walk you through the install.

--

Marc


&nbsp

Reinhard
Posts: 74
 Member Since:
2009-07-09
Hi Marc, just one question
Thu, 08/27/2009 - 7:44am

Hi Marc,

just one question regarding the B700 and wanpipe.
On your homepage it says your current wanpipe (rpm) has no bri support.
I need bri!
Should I go with the beta driver? Is it stable?
ftp://ftp.sangoma.com/linux/current_wanpipe/current-beta.tgz
and use this tutorial?
http://wiki.sangoma.com/wanpipe-linux-asterisk-dahdi#config

Thanks
Reinhard

--


&nbsp

marc.sangoma
Posts: 373
 Member Since:
2008-04-08
Hi Reinhard, I have checked
Mon, 08/31/2009 - 7:07am

Hi Reinhard,

I have checked with our engineers and they are experiencing some issues with the RPM build. They are working together with Fonality to get this building issue resolved. Once the rpms are finished they will be posted online at http://wiki.sangoma.com/wanpipe-asterisk-trixbox-rpms.

--

Marc


&nbsp

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.