Home » Forums » Vendor Forums - Non-Certified » Grandstream

Grandstream GXP2000 Paging Phone Problem - HELP!!

hopewood
Posts: 1
 Member Since:
2010-04-08
Submitted by hopewood on Fri, 04/23/2010 - 5:48am.

I am using a Trixbox Appliance with CE installed and using all IP Phones. I am using this Grandstream GXP2000 for my paging intercom in the shop and having a problem with the auto answer feature. Every morning I have to log into the phone and put auto answer back on. Every night it seems that it switches back to default which is off. I don't even have a handset hooked up to this phone as it is in a closet and nobody is ever going to use this phone, it is strictly for paging. I would really appreciate if someone would be able to help out with this annoying problem as the employees get here at 5:30 am and I don't get in until 8:00. Therefore the paging doesn't work until I get here and log in and switch on auto answer. The only other thing that is turned on is SIP registration.

‹ Grandstream HT-846 (Bad Auth Error) BT-200 to trixbox ›


dudemcdudedude
Posts: 63
 Member Since:
2007-12-03
This is most likely because
Thu, 04/29/2010 - 3:39pm

This is most likely because you used the endpoint manager and it is downloading the config from it. Turn off the tftp settings in it and see if it fixes it.



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.