I am new to trixbox. Is there a basic tutorial on setting up the Grandstream GXW4101 with trixbox? I read though the tutorial from Grandstream http://www.grandstream.com/support/gxw_series/gxw410x/documents/g... but it was confusing.
I right now have Trixbox setup with 2 IAX2 phones both seem to work I can call each of them. They are setup in a ring group I have an any DID / any CID inbound route pointed to this group. I also have a Sip trunk setup I can receive calls from that trunk.
The problem is I cannot receive calls from the GXW4101 gateway. I have the FXO lines Unconditional Call Forward to VOIP setup with each channel to its own user ID. In trixbox box I 3 sip trunks setup 1 for each of the 3 ports on the GXW4101. I am not using FXO4
Here is the config for each trunk changing the name and secret from 101 to 102, 103, for each port.
Trunk Name:101
PEER Details:
type=friend
secret=101
host=10.0.10.48
dtmfmode=rfc2833
context=from-trunk
I can make outbound call using the GXW4101 just can not receive them.
Also is it possible to on outbound calls choose which FXO port to dial out on? I tried to setup 3 outbound routes. I set the following up and set the Trunk Sequence to only that line. This does not seem to work it still just randomly picks one of the FXO ports.
route 1
91|1800NXXXXXX
91|1866NXXXXXX
91|1877NXXXXXX
91|1888NXXXXXX
91|1NXXNXXXXXX
91|NXXXXXX
route 2
92|1800NXXXXXX
92|1866NXXXXXX
92|1877NXXXXXX
92|1888NXXXXXX
92|1NXXNXXXXXX
92|NXXXXXX
route 3
93|1800NXXXXXX
93|1866NXXXXXX
93|1877NXXXXXX
93|1888NXXXXXX
93|1NXXNXXXXXX
93|NXXXXXX
Program-- 1.3.1.6 Loader-- 1.1.3.4 Boot-- 1.1.3.2 is the version information on the GXW4101
Thanks in advance.
Member Since:
2011-03-16