Home » Forums » Vendor Forums - Non-Certified » Rhino Equipment

Boot hangs on rcbfx 1: Starting DMA hangs

jimmyb
Posts: 1
 Member Since:
2010-05-18
Submitted by jimmyb on Tue, 05/18/2010 - 5:31pm.

Help!!!

I've had the office phones running on Trixbox 2.8 with a Rhino R4FX0-EC card for about a year and everything has been working smoothly until today. The first sign of trouble came when I tried to make a call and was met with "All circuits are busy". Since there was no active calls I assumed Trixbox had got confused and restarted it. Sadly this didn't help, so I tried to reboot the server. The machine went down cleanly, but on the way back up the machine hangs during the boot sequence. The last thing on the screen is rcbfx 1: Starting DMA. After having tried a number of reboots I removed the Rhino card and now the server boots. Is this a sign the card is dead or is it a driver issue?

Thx.

‹ Phones are down every morning. Any Ideas? fax machine behind a spa8000 unable to send faxes using E1 with Ec card ›


Astrosmurfer
Posts: 643
 Member Since:
2009-12-28
Unless you have recently
Tue, 05/18/2010 - 8:09pm

Unless you have recently changed drivers, then this is likely a failed R4FXO-EC.



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.