I do not see a spot in the gui for this like the GXP-2020s but the phones state they support this. Does anyone know how to set this up?
 
GXV-3000 Auto Dial / Off Hook Dial
Submitted by dudemcdudedude on Thu, 04/03/2008 - 11:27am.
It's in "Advance Setting".
Thu, 04/03/2008 - 11:38am
It's in "Advance Setting". It will use account 1 setting to dial out.
 
I do see this on my
Thu, 04/03/2008 - 11:43am
I do see this on my GXP-2020s but not my GXV-3000. Below is my Phone Info for Versions and below that is my advanced page.
Hardware Revision: Main-- 3.1 Rev D Interface-- 3.1 Rev D
MAC Address: 00:0B:82:12:A8:DD
Product Model: GXV3000
Software Version: Application-- 1.0.1.27 Loader-- 1.0.0.9 Boot-- 1.0.1.1
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS ACCOUNT 1 ACCOUNT 2 ACCOUNT 3
Admin Password: (purposely not displayed for security protection)
G723 rate: 6.3kbps encoding rate 5.3kbps encoding rate
Silence Suppression: No Yes
Voice Frames per TX: (up to 10/20/32/64 for G711/G726/G723/other codecs respectively)
Video frame rate:
Video bit rate (kbps):
Video Packet Size: (from 300 to 1400, default is 1400)
Video Rate Control: Frame TMN8
Video Frame Skipping: No Yes
Sharpening Filter: (0-9, 0 means disabled, default is 5)
Brightening Filter: (0-9, 0 means disabled, default is 5)
Enable Video Surveillance: No Yes
Surveillance RTSP Port: (default is 554)
Streaming RTSP Server:
Streaming RTSP User ID:
Streaming RTSP Password: (purposely not displayed for security protection)
Layer 3 QoS: (Diff-Serv or Precedence value)
Layer 2 QoS: 802.1Q/VLAN Tag 802.1p priority value (0-7)
No Key Entry Timeout: (in seconds, default is 4 seconds)
Use # as Dial Key: No Yes
local RTP port: (1024-65535, default 5004)
Use random port: No Yes
keep-alive interval: (in seconds, default 20 seconds)
Use NAT IP (if specified, this will be used in SIP/SDP message)
STUN server: (URI or IP:port)
Firmware Upgrade and
Provisioning: Upgrade Via TFTP HTTP
Firmware Server Path:
Config Server Path:
Firmware File Prefix:
Firmware File Postfix:
Config File Prefix:
Config File Postfix:
Allow DHCP Option 66 to override server:
No Yes
Automatic Upgrade:
No Yes, check for upgrade every minutes (default 7 days)
Always Check for New Firmware
Check New Firmware only when F/W pre/suffix changes
Always Skip the Firmware Check
Authenticate Conf File:
No Yes (cfg file would be authenticated before acceptance if set to Yes)
Screen Saver Download: Enable Screen Saver Download:
No YES, HTTP YES, TFTP
Screen Saver Server Path:
Phonebook XML Download: Enable Phonebook XML Download:
No YES, HTTP YES, TFTP
Phonebook XML Server Path:
Remove Manually-edited entries on Download:
No Yes
Network Screen Saver: Enable Network Screen Saver:
No YES, HTTP
Network Screen Saver Path:
Weather Forecast: Enable Weather Forecast:
No YES, HTTP
Weather Forecast Server Path:
Headline News: Enable Headline News:
No YES, HTTP
Headline News RSS Server Path:
DTMF Payload Type:
Syslog Server:
Syslog Level:
NTP Server: (URI or IP address)
Allow DHCP Option 42 to override NTP server:
No Yes
Distinctive Ring Tone: Custom ring tone 1, used if incoming caller ID is
Custom ring tone 2, used if incoming caller ID is
Custom ring tone 3, used if incoming caller ID is
System Ring Tone:
Call Progress Tones:
Dial Tone
Message Waiting
Ring Back Tone
Call-Waiting Tone
Busy Tone
Reorder Tone
Start Browser On Boot: No Yes
Enable Browser Toolbar: No Yes
Browser Home Page: (default is about:/start.htm)
Disable Call-Waiting: No Yes
Disable Call-Waiting Tone: No Yes
Disable Direct IP Call: No Yes
Use Quick IP-call mode: No Yes
Allow Media Loopback: No Yes
Lock keypad update: No Yes (configuration update via keypad is disabled if set to Yes)
 
You are right, will look
Thu, 04/03/2008 - 12:17pm
You are right, will look into this.
 
Any word on this?
Sun, 04/06/2008 - 8:18pm
Any word on this?
 
I need to figure out a
Thu, 04/10/2008 - 4:28pm
I need to figure out a solution for this. Is there any solution available that anyone is aware of?
 
It's already in the
Fri, 04/11/2008 - 6:30pm
It's already in the engineering schedule for this. But it does take time.
 
Any idea on a estimated time
Sat, 04/12/2008 - 8:56am
Any idea on a estimated time frame or the possibility for beta firmware that has it I can test ... I am developing an appliance that needs this for it to work and I have a deadline and Grandstream's documentation stated the phone supported ... I appreciate your help with this matter!
 
I need this as soon as
Tue, 04/15/2008 - 12:50pm
I need this as soon as possible I have my project done (2 way video kiosks) but I need to get this one last detail working. Please if there is anyway for me to get this anything I can do please let me know!
 
Any news?
Thu, 04/24/2008 - 12:14pm
Any news?
 
It will be in the next
Mon, 04/28/2008 - 2:39pm
It will be in the next release, coming out soon.
 
When is soon? I need this
Mon, 04/28/2008 - 7:55pm
When is soon? I need this asap and is there anyway for me to get a beta with it on it?
 
Try contact GS support late
Tue, 04/29/2008 - 4:34pm
Try contact GS support late next week.
 
What is the best way to
Sun, 05/04/2008 - 9:42pm
What is the best way to contact GS support?
 
Still no word on this?
Fri, 05/09/2008 - 8:48am
Still no word on this?
 
Update: It's already
Tue, 05/13/2008 - 4:47pm
Update: It's already implemented in the newer firmware but engineering is not releasing it, should be very soon.
 
I really need this feature
Tue, 05/13/2008 - 6:32pm
I really need this feature as previously stated I am going to have to look for another video IP solution if I can't find this by the end of the week otherwise I am going to lose the contract with my client.
 
AutoDial Firmware
Wed, 05/14/2008 - 3:05pm
I am working on a similar project, please mail me the firmware once completed on eborg at logicpass dot com
Regards,
Eman
 
Any updates?
Mon, 05/19/2008 - 5:30pm
Any updates?
 
dudemcdudedude et
Thu, 05/22/2008 - 4:21pm
dudemcdudedude et all,
Finally, the firmware is avaliable, one of your ticket had been processed by GS support engineer and he should be able to send you a test build soon.
 
I have had 2 tickets
Thu, 05/22/2008 - 5:59pm
I have had 2 tickets processed with no firmware ... one just happened today.
 
Your ticket is already
Fri, 05/23/2008 - 11:29am
Your ticket is already processed, and the engineer in charge for your ticket will send you a link for the SW.
 
How will I receive the link
Fri, 05/23/2008 - 11:59am
How will I receive the link for the software?
 
http://www.grandstream.com/BE
Thu, 05/29/2008 - 4:35pm
Member Since:
2007-12-03