Help with firmware upgrade

wmarple
Posts: 60
Member Since:
2007-01-02

Hello,

I'm trying to get my firmware for my gxp-2000's upgraded from 1.1.2.23 to 1.1.4.17. I downloaded the new firmware from grandstreamsucks.com with wget. I then unzipped and replaced the existing files. I then ran a setup-grandstream, per the instructions on another thread. I have the phone setup to use TFTP and changed the firmware path to point to my trixbox. When the phone reboots, it seems to connect and download the files, but I have no way at this point to understand why it's not grabbing the firmware upgrade. Someone please help!

~Will

P.S. Here is a tail of the log file as the phone in question is downloading files after a reboot.

Jul 17 12:35:32 asterisk1.local atftpd[20515.-1208125760]: Advanced Trivial FTP server started (0.7)
Jul 17 12:35:32 asterisk1.local atftpd[20515.-1208128592]: Serving /tftpboot/cfg000b820f144e to 192.168.1.71:25684
Jul 17 12:35:32 asterisk1.local atftpd[20515.-1208128592]: Serving /tftpboot/boot55b.bin to 192.168.1.71:25685
Jul 17 12:35:32 asterisk1.local atftpd[20515.-1208128592]: Serving /tftpboot/gxp2000b.bin to 192.168.1.71:25686
Jul 17 12:35:33 asterisk1.local atftpd[20515.-1208128592]: Serving /tftpboot/ring1.bin to 192.168.1.71:25687
Jul 17 12:35:33 asterisk1.local atftpd[20515.-1208128592]: Serving /tftpboot/ring2.bin to 192.168.1.71:25688
Jul 17 12:35:33 asterisk1.local atftpd[20515.-1208128592]: Serving /tftpboot/ring3.bin to 192.168.1.71:25689
Jul 17 12:35:33 asterisk1.local atftpd[20515.-1208128592]: Serving /tftpboot/gxp2000.lpf to 192.168.1.71:25690
Jul 17 12:40:33 asterisk1.local atftpd[20515.-1208125760]: atftpd terminating after 300 seconds
Jul 17 12:40:33 asterisk1.local atftpd[20515.-1208125760]: Main thread exiting



greg101
Posts: 112
Member Since:
2007-01-30
When you ran

When you ran setup-grandstream you probably overwrote the newer firmware in the TFTP boot Dir.

Unzip the new firmware again.
Reboot phone



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.